direct text.

Com presented iPhone 6 SPlus screen replacement please read the following morning before attempting thisrepair you doing this repair your own risk using a pentode screwdriver from directtext.

Com remove the tube cantaloupes crews from the bottom of the phone using a suction cup and a case openertool from direct text.

Com but the suction cup on top of the screenand lift the screen up you'll need to use the case opener tool to separate theadhesive from the screen to be able to lift it lifted up to a 90 degree angle but nofurther using a Phillips screwdriver number double 0 for direct fix removethe five screws to remove the she'll keep track of this cruise they aredifferent sizes here is a diagram showing you the five screws need toremove from the shield now that the screws are removed you cannow remove the shield plate we're now going to start to remove threeribbon cables from the screen using a plastic tool pop the ribbon cables up inthe order that you see on the screen first the front one than the one on theright then there will be one hidden underneath the very first front cablewill point out here in a second that's the one right there make sure youpop that one up to be careful not to rip any other ribbon cables it was removed you can now if the screenthere is it he's at the top so be careful check the link below we will have aseparate video showing you how to move the replacement parts over from thescreen to the new screen since many of them do not include home buttons andother parts make sure you do not separate the adhesive and it stays withthe bottom of the phone and not the screen does he have may also be awaterproof adhesive to help keep the phone from getting wet you now going to reconnect the cablesgoing in reverse order first the cable that was hiddenunderneath than the one on the right than the one on the front they justpress down in sometimes you will even here then click into place with the three cables in place you nowgoing to reinstall the shield again here is the diagram showing youwhere the five screws are located put them back in order now you're goingto bring the screen back down and you're going to have to line up the edges to beable to put it back in place make sure that the screen pops intoplace and goes all the way in and be sure to check all the way around thescreen is flush before going on to the next step of installing screws with thescreen sealed all the way down reinstall the parental of screws on thebottom don't over tighten the mantle of screwson the bottom go ahead and turn the device on your alldone route 3 place in the screen on the iPhone 6 S Plus for all parts and accessory needs pleasego to our website direct fix dot com also be sure to click on the screen tosubscribe to our YouTube channel.

Source: Youtube